Buscar

industry main

D-040 V / I | Combination Air Valve for Industry

Descargar

  • Dibujos de productos:
  • Instalación y mantenimiento:
  • Instalación y mantenimiento:
  • Instalación y mantenimiento:
PN 16

Descripción

The D-040 series Combination Air Valve has the features of both an air release valve and an air & vacuum valve.
The air release component is designed to automatically release small pockets of air to the atmosphere as they accumulate along a pipeline or piping system when it is full and operating under pressure.
The air & vacuum component is designed to automatically discharge or admit large volumes of air during the filling or draining of a pipeline or piping system. This valve will open to relieve negative pressures whenever water column separation occurs.

Características principales

  • Working pressure range:
    • D-040 PA, St. St., PVDF, and Duplex: 0.2 - 16 bar
    • D-040 PP: 0.2 - 10 bar
  • Testing pressure: 1.5 times the maximum working pressure.
  • Maximum working temperature: 60° C.
  • Maximum intermittent temperature: 90° C.

Note: For applications requiring a working temperature above the maximum stated or below 50 C., please consult first with the A.R.I. Applications Engineering Dept.

  • Reliable operation reduces water hammer incidents.
  • Dynamic design allows for high capacity air discharge while preventing premature closure.
  • Lightweight, small dimensions, simple and reliable structure.
  • The discharge outlet enables the connection of a vent/drain pipe
  • The large size of the automatic air release orifice relative to the air valve body:
    • Discharges air at high flow rates.
    • Lessens the danger of its obstruction by debris.
    • Utilizes the rolling seal mechanism, making it less sensitive to pressure differential than a direct float seal.
  • Due to its light weight, the valve may be installed on plastic piping systems, as well as other lightweight piping systems.

Selección de la válvula

  • Wide size range: 1/2”, 3/4”, 1”, 2” threaded male connections, NPT or BSPT.
  • The D-040 series:
    • D-040 – reinforced nylon body and base
    • D-040 PP - polypropylene body and base
    • D-040 PVDF - PVDF body and base
    • D-040 ST ST – stainless steel body and base
    • D-040 DP – duplex 5A body and base
  • The air valve is also available as a low pressure air valve, D-040 LP, with a pressure range of 0.5 – 6 bar

Note

For best suitability, it is recommended to send the fluid chemical properties along with the valve request.
Upon ordering, please specify: model, size, working pressure, thread and flange standard and type of liquid.

Videos y Animaciones

Actualizado el: Miércoles, 30 Julio 2014